![background image](http://html1.mh-extra.com/html/graco/25r128/25r128_setup-operation-repair_2251511044.webp)
Operation
44
3A7526B
Prime the System
1. Remove Static Mixer Package (AH) from the MD2
Dispense Valve (AE) (if installed) and place a waste
container below it.
2. Pressurize the A and B Material Feed System (K
and L); set the lower pressure to 20 psi (0.14 MPa,
1.4 bar).
3. Go to the Advanced Screen 1 of the PR-X control
box
(J). Select ‘Piston move up’, the piston moves
up until the sensor sends out the stop signal, then
set the move speed to 0.2 cc/s.
4. Select ‘Dispense valve’, ‘Inlet valve A’ and ‘Inlet
valve B’ to turn on MD2 Dispense Valve (AE) and
Inlet Valve A and B (AL or AM).
5. When both sides of the system have a continuous
and stable flow, select ‘Dispense valve’ again to turn
off the MD2 Dispense Valve (AE).
6. Return to the Manual screen 1. Change the function
to reload, then run the system.
7. Dispense several full stroke shots until the PR-X
Machine (H) is free of air.
F
IG
. 39 Advanced Screen 1
F
IG
. 40 Advanced Screen 2
F
IG
. 41 Manual Screen 1
Summary of Contents for 25R128
Page 77: ...Parts 3A7526B 77...