Graco 25R128, Setup - Operation - Repair

Page: 12 / 92

General Information
12 3A7526B
Locate and Install
1. The PR-X Machine (H) can be directly mounted on
a Customer Robot (M) or remotely mounted on a
motion table or table top. Verify the location has
access to compressed air and AC power.
2. Place the PR-X Machine (H) onto the designated
location.
3. Attach the PR-X Bottom Plate (AK) to the selected
location by installing fasteners (not provided with
the PR-X machine) through the four mounting holes.
There are also two position pin holes. Refer to F
IG
.
5 or F
IG
. 6 for mounting hole dimensions.
F
IG
. 5: Mounting Hole Dimensions for Installing the PR-X Machine - Supply Pump Feed
3.9 in.
(100 mm)
2.4 in.
(60 mm)
5.3 in.
(134 mm)
4 x
0.34 in.(8.5 mm) Through
5.3 in.
(134 mm)
2 x
0.3 in. (8 mm) Through