manualshive.com logo in svg

Grace Industries MX900-H, User Information

Share
Download
Grace Industries MX900-H User Information Download Page 171

171

Incident Viewer Description

The Last Incident Viewed will be re-opened upon start up of the program. (On initial 
startup, a default incident provided with installation will be opened)

Select Open an Incident to view the saved incident files on the Hard Drive

Select the Print Option to print the Incident Data

The Main Form show the Incident Data entered from the Operation Setup Screen of 
In-Command for that incident, including Incident name, number, time/date, Incident 
Data Settings and Location Settings. Incident data saved includes:

Incident Details of the Incident

Active Users that checked in at the incident, along with profiles

Complete Incident Log of the Incident

Complete Radio Data Log of the Incident

System Info at the time the Incident was saved

Return to TOC

Summary of Contents for MX900-H




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands