manualshive.com logo in svg

Grace Industries MX900-H, User Information

Share
Download
Grace Industries MX900-H User Information Download Page 120

120

User Sort Priority

Continued… 

Users with Equal Priority:

If multiple users have the same priority scores based on the above 

statuses, then the users will be sorted within that score based on Group ID and User ID.

System and Aux ID priority:

The assigned ID adds another level to the sorting scheme. The highest 

priority would belong to the root System ID followed by the remaining System IDs and then the 
Auxiliary IDs would fall in line after that based on the order they are listed in system setups. i.e. 
Alarms in the Root System ID and an Auxiliary ID would be grouped together, but the Root System 
ID alarm would take precedence and display on top.

Mode 1 vs. Mode 2 

The mode used for sorting can be configured on the System Setup Screen of the Configuration 

Module. There are two options: 

Mode 1:

OFF HIGHER THAN ACTIVE 

Mode 2:

ACTIVE HIGHER THAN OFF 

These two options reverse the order in which On and Off units are displayed. 

With Mode 1, all Off units display above On units.  

In Mode 2, all On units display above Off units. Mode 2 is the most commonly used mode. 

Note: All other sorting rules apply regardless of which mode is chosen. 

Return to TOC

Summary of Contents for MX900-H




















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands