GPO Display
Video Walls - Commercial Monitors - Digital Signage - Visual Solutions www.gpodisplay.com
12
Plywood-Backed/Flat wall surface Installation (if applicable)
1. Affix ¾” plywood to the wall. Power outlets must be recessed.
Outlets which are level with the surrounding wall surface may lead
to obstruction of the side-to-side movement of the screens within
the Z-Shift mount structure.
When plywood backing is
used, ensure that there are
holes of sufficient size to
run all necessary cabling
.
3. Assemble the mounts (affix to one another using
interconnecting M8 bolts) and ensure that they are level, as
instructed previously in this manual.
2. Affix H-mounts in the manner shown in the image on the right,
following the steps set forth in previous pages of this manual
.
Chapter 2 Preparations: Wall Mounting
