GPO Display
Video Walls - Commercial Monitors - Digital Signage - Visual Solutions www.gpodisplay.com
Install adjustment bolts/knobs
17
STEP 3
Chapter 3 Mounts Installation
Insert Z-Bolts into each mount (there are insertion positions at
each of the four corners). Make sure they are fully inserted.
Insert Y-Knobs into each mount (there are two insertion
positions located at the bottom left/right of the mount).
Turn Y-Knob clockwise until ~1mm of the bolt is visible stop the Y-
Adjustment plate. The image shown to the bottom/right shows the
Y-Knob inserted further than needed during initial installation. Make
sure that the end of the bolt does not protrude more than 1mm
above the Y-Adjustment plate prior to installation of the displays.
Further adjustments can take place once displays are installed.
Y-Knob
Z-Bolt
Y-Knob
Z-Bolt
Y-Adjustment Plate
