GPO Display
Video Walls - Commercial Monitors - Digital Signage - Visual Solutions www.gpodisplay.com
A minor gap between monitors is required
High temperatures can cause slight expansion of panels. If there is no space
between panels, damage may occur as a result of pressure resulting from the
expansion of adjacent panels into one another. Please ensure that there is a
≥
0.5mm gap between the displays. This can easily be checked by sliding a standard
business card between the gap (if there is no resistance, the gap is sufficient)
*Recommended gap
between displays:
≥
0.5mm
Do not tilt displays in a manner that would result in
pressure on the panel edges. If backlight leakage (as
shown below) is evident, this is a sign of excessive
pressure and adjustment to the alignment of the array
must take place.
If more than
1kg
of weight is applied to the top bezel of a panel (as
illustrated to the right), backlight leakage will result. This is a sign that
the panel alignment/angle must be adjusted or other countermeasures
must be applied.
5
Chapter 1 Precautions
