Gotting HG G-98760-C Series, Device Description

Page: 27 / 54

Software
HG G-98760-C
English, Revision 06, Date: 14.12.2016 27
2. Choose the respective port via the connect to entry in the submenu. Confirm
with
. Save the altered values iwhen you are asked for it when finishing
HyperTerminal.
5.2 System Monitor
In the monitor mode the system can be configured with the help of a menu. To use
the monitor mode you need to know which protocol is adjusted in your antenna.
5.2.1 How to start the monitor program
The way the monitor program ist started depends on the chosen procedure (see sec-
tion 5.2.2.4 on page 33).
5.2.1.1 Prozedur Monitor only
Falls die Antenne auf die Prozedur „Monitor only“ eingestellt ist, wird 10 s nach Ein-
schalten der Monitormodus gestartet. Sie brauchen dann keine Dateien zu übertragen
und können den Abschnitt 6.2.1.2 überspringen.
5.2.1.2 Prozedur 3964R/transparent
The command to switch to monitor mode should be entered directly with a PC. To do
so, start your terminal program. If you are using HyperTerminal (section 5.1), install the
provided disk into your disk drive and display the contents. If HyperTerminal has been
correctly installed, the terminal program can now be started directly by double clicking
the respective *.ht file (
Monitor9600.ht
at 9600 Baud and
Monitor19200.ht
at
19200 Baud). If necessary, adapt the COM-port (see section 5.1.2). You can download
the following files from our server at http://www.goetting.de/en/multimedia . Search for
config to find them.
Once the antenna is activated (takes 10 to 26 seconds after start-up) you can transfer
the appropriate text file from the disk by using your terminal program. The following
four files are on the disk.
1.
Mon3964r.txt

Transfer if the system is adjusted to procedure 3964R with „ HighByte first “. The
file contains the characters:

02 4D 4F 4E 49 10 03 16 in hexa-decimal notation
2.
Mon6439r.txt

Transfer if the system is adjusted to procedure 3964R with „ LowByte first “. The
file contains the characters:

02 4F 4D 49 4E 10 03 16 in hexa-decimal notation
3.
Montrans.txt

Transfer if the system is adjusted to procedure Transparent with „ HighByte
first “. The file contains the characters:

3D 4D 4F 4E 49 38 in hexa-decimal notation.
4.
Transmon.txt

Transfer if the system is adjusted to procedure Transparent with „ LowByte
first “. The file contains the characters:

3D 4F 4D 49 4E 38 in hexa-decimal notation