24
GMC-I Messtechnik GmbH
Settings
☞
Press the
<FUNCTION>
key [14] at the front of the
KONSTANTER.
If
no settings have yet been changed via the FUNCTION menu
after switching the device on, the
SEt
function group is
accessed upon pressing the
<FUNCTION>
key.
If settings have already been changed in the function menu,
the
last edited function group
or
function
is accessed
automatically.
•
Accessing the last edited function:
☞
If you want to configure a function included in the current
function group, select the function group by pressing the
<FUNCTION> key. Detailed information is included in the
respective section of this chapter.
☞
If you want to configure a function from another function
group, first return to the
function groups menu
by pressing
the
<CE/LOCAL>
key.
Figure 4.7 a
Accessing the Functions Submenu
☞
If the function groups menu is currently open, you can
access the following function groups:
☞
If the desired function group does not appear immediately
at the left-hand display, repeatedly press the
<FUNCTION>
key until the name of the desired function group appears
at the
left-hand display
(SEt in this example).
•
Forward scrolling
through function groups in this menu:
☞
Repeatedly press the
<FUNCTION>
key or
☞
Press and hold the
<FUNCTION>
key and
repeatedly press
the <
> key at the same time.
•
Reverse scrolling
through function groups in this menu:
☞
Press and hold the
<FUNCTION> key and
repeatedly press
the <
> key at the same time.
•
Accessing functions in the selected function group:
☞
Press the
<ENTER>
key.
Figure 4.7 b
Switching Amongst Individual Function Groups
Note
The order in which the commands are explained in the following sections
corresponds to the actual sequence for manual operation of the
SSP KONSTANTER. This should make it easy to configure device functions
and parameters without leafing back and forth through the instructions.
FUNCTION
FUNCTION
ENTER
FUNCTION
+
Jump to
last edited
function group
Jump to
last edited
function
e.g.
e.g.
e.g.
*
CE/LOCAL
FUNCTION
FUNCTION
FUNCTION
+
FUNCTION
+
FUNCTION
+
FUNCTION
+
Summary of Contents for SSP 120 Series
Page 2: ...2 GMC I Messtechnik GmbH ...
