Gorilla Playsets Malibu Pioneer Peak 1500DWR, Manual, Page: 99 / 171

2 X 4 X 22.75"
SUPPORT RIGHT
WALL PANEL
SUPPORT LEFT
2 X 4 X 22.75"
WALL PANEL
ROPE LADDER SUPPORT
C
8 "
21 7
21 "
8
7
15 38 "
2-1/2" WOOD SCREW
SCALE 2 : 13
DETAIL C
WALL PANEL SUPPORT LEFT
2 X 4 X 22.75"
EMPTY
STEP 38: WALL PANEL SUPPORTS
1: PLACE THE 2 X 4 X 22.75" WALL PANEL SUPPORT LEFT ANGLED END ON TOP OF THE GABLE ASSEMBLY LEFT SIDE
AND THE OPPOSITE END WITH THE COUNTERSUNK HOLE FLUSH AGAINST THE LEFT FRONT CORNER POST. MAKE SURE
THE ANGLED END OF THE WALL PANEL SUPPORT IS FLUSH TO THE INSIDE OF THE GABLE ASSEMBLY. THE WALL PANEL
SUPPORT TOP EDGE MUST BE PARALLEL AT 21-7/8" TO THE TOP EDGE OF THE ROPE LADDER SUPPORT. ATTACH THE
WALL PANEL SUPPORT LEFT TO THE GABLE ASSEMBLY WITH ONE #8 X 2-1/2" WOOD SCREW.
2: THE COUNTERSUNK HOLE WILL REMAIN EMPTY FOR NOW.
3: REPEAT SUB-STEPS 1 & 2 FOR THE OPPOSITE SIDE.
91