Gorilla Playsets Malibu Pioneer Peak 1500DWR, Manual, Page: 56 / 171

BOARD
SUPPORT
FRONT FACE
ROPE LADDER
5/16" X 4-1/2"
2 X 6 X 70"
2 X 6 X 102"
5/16" WASHER
HEX BOLT
2 X 6 X 102"
ROPE LADDER
RUNNER
FRONT SIDE OF PLAY STET
LEFT SIDE
OF PLAY SET
HOLES
FOR
CLATTER
BRIDGE
STEP 5: FRONT FRAME ASSEMBLY
1: PLACE THE 2 X 6 X 102" ROPE LADDER RUNNER ON THE FRONT OF THE CORNER POSTS. THE HOLES IN THE
ROPE LADDER RUNNER SHOULD BE OFFSET UP.
2: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE SANDBOX BOARD TO THE
T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
3: PLACE THE 2 X 6 X 70" FRONT FACE BOARD WITH NOTCHES ON THE FRONT OF THE CORNER POSTS. THE HOLES IN
THE FRONT FACE BOARD SHOULD BE OFFSET UP.
4: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE FRONT FACE BOARD TO
THE T-NUTS INSTALLED ON THE CORNER POSTS. THE BOTTOM HOLES WILL BE USED LATER.
5: PLACE THE 2 X 6 X 102" ROPE LADDER SUPPORT ON THE FRONT OF THE CORNER POSTS. THE HOLES IN THE ROPE
LADDER SUPPORT SHOULD BE OFFSET UP.
6: USE 5/16 X 4-1/2" HEX BOLTS AND 5/16" WASHERS TO ATTACH THE TOP HOLES OF THE ROPE LADDER SUPPORT TO
THE T-NUTS INSTALLED ON THE CORNER POSTS.
48