Gorilla Playsets Malibu Pioneer Peak 1500DWR, Manual, Page: 74 / 171

2 X 2 X 16"
FLOOR SUPPORT BOARD
STEP 18: CLIMBING RAMP
1: ATTACH THE 2 X 2 X 16" FLOOR SUPPORT BOARDS TO THE FLOOR BOARDS WITH 2-1/2" WOOD SCREWS. (SEE
DETAIL VIEW BELOW)
2: PLACE T-NUTS ON THE INSIDE OF THE HOLES IN THE RAMP SIDE BOARDS. SET THE T-NUTS WITH A HAMMER
FLUSH/NEAR FLUSH WITH THE RAMP SIDES.
3: FASTEN THE 90 GREEN BRACKET TO THE RAMP SIDES WITH 5/16 X 1-1/2" HEX BOLTS AND 5/16" WASHERS.
GREEN BRACKET 90
HEX BOLT
5/16" WASHER
5/16 X 1-1/2"
T-NUT
PLACE ONE 2-1/2" WOOD
SCREW IN EACH END OF
THE FLOOR SUPPORT
BOARDS.
66