Gorenje Aerogor ECO COMPACT INVERTER 10A, Installation Manual

Page: 41 / 97

34
If the “Pause” symbol is displayed, the heat pump is manually switched off!
b) Heating or cooling indicator
The symbol indicates that heating or cooling by ambient temperature or thermostat is
activated, or is activated due to manual operation mode!
Heating or cooling is activated or deactivated based on the ambient temperature!
Factory setting of enabled heating or cooling based on the ambient temperature:
Heating
– 18 °C
Cooling
– 25 °C
These values can be set as you wish.
Example:
Heating activation temperature is set to 18 °C. This means that when the average
ambient temperature exceeds 18 °C, the heat pump will stop heating. The sun
symbol will disappear from the display.
When the average ambient temperature drops below 18 °C, the sun symbol
reappears on the display and the heat pump will reinitiate heating of the premises,
unless an additional thermostat is used. In that case, the heat pump will require the
deactivation of the thermostat.
c) Activating the heating of domestic water
This symbol is visible on the display only when the heat pump is used for heating
domestic water.
The symbol is always visible on the display, unless the domestic hot water timer is
used.
If the domestic water timer is used, a different symbol appears in the domestic water
heating regime.
d) Communication
This symbol displays the communication status of the heat pump.
A light blue symbol indicates normal communication.
A grey symbol indicates loss of communication.
In this case, an error symbol is displayed as well. Please notify an authorized service
person immediately!
e) Display of the current Operation mode
The heat pump displays the current Operation mode.
Heating
Cooling
Heating of domestic water
QuickHeat