Gorenje Aerogor ECO COMPACT INVERTER 10A, Installation Manual

Page: 26 / 97

19
User can either use the dedicated mounting bracket from the supplier or prepare a suitable
bracket for the unit installation. Make sure the installation meets the following requirements:
1. The unit must be installed on flat concrete blocks or a dedicated mounting bracket.
The bracket should be able to support at least 5 times of the unit weight.
2. All nuts must be tightened after the bracket is fixed otherwise it may cause damage to
the equipment.
3. Double check and make sure the installation of the unit is firm enough.
4. The bracket can be made from stainless steel, galvanized steel, aluminium and other
materials as required by the user.
5. Besides the mounting bracket, the user can also install the outdoor unit on two
concrete blocks or a raised concrete platform. Please make sure that the unit is
securely fastened after installation.
6. Please see the dimensions of outdoor unit when choosing a suitable wall bracket.
Hole for piping should lean a little bit to outside
(≥ 8 degrees) to keep the rain or condensate
water from flowing back indoors.
AEROGOR ECO INVERTER 10A
AEROGOR COMPACT INVERTER 10A
AEROGOR ECO INVERTER 13A
AEROGOR COMPACT INVERTER 13A
AEROGOR POWER EVI INVERTER 15A
AEROGOR POWER EVI INVERTER 18A