2.1 Model and type designation / identification
A type plate and series number sticker are situated on the inside of the
housing cover (behind the accessories bag).
In the case of queries, always give the product designation and series
number.
2.2 Product description
The appliance tester has been developed for carrying out the following
measurements for testing the safety of electrical appliances in accordance
with DIN VDE 0701-0702/EN 62638 (BGV A3)
and DIN VDE 0751-1/EN 62353:
–
Measuring protective conductor resistance with compensation of the
measuring line
–
Measuring insulation resistance
–
Measuring substitute leakage current
–
Measuring protective conductor current - direct method or as
differential current
–
Measuring touch current - direct method or as differential current
–
Measuring device leakage current / leakage current from the applied
part - alternative measurement
(at TG euro 1 med only)
–
Measuring device leakage current - direct method or as differential
current
(at TG euro 1 med only)
–
Measuring the leakage current from the applied part - mains voltage at
the applied part
(at TG euro 1 med only)
–
Function test with measurement of mains voltage, load current, active
power, apparent power and reactive power, power factor and frequency
–
Testing of non-heating devices and extension cables
2.3 Other equipment features
–
Stable, dust-proof carrying case as housing
–
Large, easy-to-read touch-screen for operating the tester (backlit)
–
Good/bad display in plain text (suitable for technically trained persons)
–
Connection for barcode scanner for reading-in the test object’s ID numbers
–
USB interface
–
MMC/SD card for storing and transferring measurement data
2.4 Scope of delivery
(order no. in brackets)
1
Appliance tester
1
measurement accessory set (7910086048) with safety test line, safety
crocodile clip and safety test tip
1
USB cable (7910086047)
1
MMC 128 MB or SD 1 GB memory card (7910086046)
1
CD-ROM with Windows® standard PC software (7910086050)
1
accessories bag with Velcro fastener (3214086006)
1
quick guide (3531086006)
1
operating manual, printed DIN A5 book (2786688240)
2.5 Optional accessories
(not included in delivery)
–
Barcode scanner (7910086044)
–
TGA three-phase adapter (7920018691) for testing devices with three-
phase connection - active for 5-pole 32 A 400 V CEE plugs
–
TGP three-phase adapter (7920018690) for testing devices with three-
phase connection - active for 3-pole 16 A 230 V CEE plugs; passive
for 5-pole 16 A 400 V and 5-pole 32 A 400 V CEE plugs
–
Adapter for checking extension cables (7920018680)
–
Adapter for non-heating appliance plugs (7920018660)
–
TG brush probe (7910086049) for touchable conductive rotating parts
–
12-unit adapter (6100001001) for contacting multiple applied parts
(for TG euro 1 med only)
2.6 Transport and storage
Please retain the original packaging for dispatch at a later date, e.g. for
calibration.
Transport damage that occurs due to inadequate packaging is not covered
by the manufacturer’s guarantee.
The appliance tester must be stored in a dry, closed room. If the device is
transported in extreme temperatures, it requires at least 2 hours
acclimatisation before being switched on.
5
Operating manual for the TG uni 1, TG euro 1 and TG euro 1 med appliance tester
Introduction
