12
Operating manual for the TG uni 1, TG euro 1 and TG euro 1 med appliance tester
Starting up
6.11 Selecting of the data memory
To save the measurement results, the appliance tester has an internal
memory (16 MB) and an MMC memory card (128 MB, supplied with the
tester). The memory card is used to save and/or transfer the measurement
results. MMC and SD memory cards with capacities from 128 MB to 1 GB
can be used.
Inserting the memory card:
Insert the memory card into the card slot with the label to the left and press
gently until it engages. To eject the memory card, press it down until it
disengages and pull the card upwards and out of the slot.
Caution!
Never force the memory card into the card slot of the
appliance tester. This can damage the memory card and the
card slot. If the memory card is not recognised, check that
it has been correctly inserted.
The measurement results can be stored
either
in the internal
memory
or
in the memory card.
In the configuration menu (Fig. 5) press the [menu page 2] function button
and then press the
[memory] function button
(Figs. 12 and 13) to
switch between the internal memory and the MMC/SD card.
The symbol in the headline changes accordingly:
6.9 Expert mode
(TG euro 1 and TG euro 1 med only)
The appliance tester also has an „Expert mode“. This allows advanced
users to save time.
Confirmations of visual inspection, function test and switching on the test
object are omitted from the test procedure.
Press the
[mode] function button
to make the setting, Fig. 11
Fig. 11a
Fig. 12
Fig. 13
6.10 Selecting the menu language
(TG euro 1 and TG euro 1 med only)
To select the menu language press on page 2 of the configuration menus
(Fig. 12),
function key [language]
and then selecting the appropriate key
for the menu language (Fig. 11b).
At the time the languages German, English, French and Italian are available.
Fig. 11b
– Internal memory
– Memory card
Date of last
calibration
Version of
the firmware
