11
Operating manual for the TG uni 1, TG euro 1 and TG euro 1 med appliance tester
Starting up
6.5 Customer-specific settings
The scope of functions of the appliance tester can be adapted to customer
specifications. This can simplify the operation of the appliance tester.
These settings do not change the standard conformity of the
appliance tester!
You reach the setup menu by pressing the
[setup]
function button
in the configuration menu (Fig. 5) - see also point 14
starting on page 44.
Fig. 10
6.6 Changing the duration of a test stage
(automatic mode)
The default duration of each test stage is set to 3 s at the factory. This
setting can be changed if for example the test object requires a longer time
to be switched on.
Press the
[t. time] function button
in the configuration menu. Using the
10-button keypad, you can enter a new test time in the next screen (Fig. 8).
The possible setting range is 3 to 600 seconds.
Fig. 8
6.7 Entering the name of the inspector
To enter the name or designation of the inspector, press the
[inspect]
function button
in the configuration menu. The screen changes to an
alphanumeric keypad. The input field has 20 characters (Fig. 9). You can
switch between alphabetic and numeric keys by using the buttons [123] or
[ABC]. The entered name remains saved in the memory even after the
tester has been switched off.
The entered name
is assigned to every test
carried out and also
appears in the log printout.
Fig. 9
This input area is
locked by a code key (Fig.
10). Please contact us for
further information: Email -
6.8 Activating the control code
(TG euro 1 and TG euro 1 med only)
Default settings for a particular test procedure can be assigned to an
appliance via a control code. A 3-digit number is entered before the ID
number of the appliance, either manually or via a barcode scanner, see
barcode printing and/or control code table. Press the
[C. code] function
button
for this, Fig. 10.
Fig. 11
