6.
Starting up
The appliance tester is equipped with modern touch-screen technology.
This means that the LC display and the control buttons are in one control
screen.
The control buttons are always edged.
After activating the mains switch a self-test is carried out.
If everything is in order, the following display appears on the touch-screen
as a
switch-on message
(Fig. 3):
Continue with button (Fig. 3).
The „Device settings“ screen appears (Fig. 3a).
6.1 Basic settings of the appliance tester
Press the [Configuration] button in the Main menu (Fig. 4).
The
Configuration Menu
appears (Fig. 5):
Fig. 5
Appliance type
Relevant standards
(VDE 0751/EN 62353
at TG euro 1 med only)
Firmware version
Manufacturer
Button
Headline
Function buttons:
Appliance testing
Testing of individual parameters
Basic settings of the appliance
tester
Fig. 3
Fig. 4
Headline
9
Symbol indicating that
compensation for the test line
has been performed
Measuring method for protective
conductor current:
DIR.
– direct measurement (test
object insulated from earth)
DIF.
– differential current
measurement (test object
not
insulated from earth)
Function buttons
Operating manual for the TG uni 1, TG euro 1 and TG euro 1 med appliance tester
Starting up
The necessary settings can be performed directly via the function buttons or
the settings can be made via the configuration menu, see Point 6.1.
Since the appliance tester does not contain a real time clock, the test date
shown here must either be confirmed or entered anew.
After confirmation with the [next] button the
Main menu
appears (Fig. 4):
Fig. 3a
Entry of the date
Entry of the inspector name/
code
Entry of the customer number
Switch the control code on/off
Expert mode switch on/off
Serial number of the appliance
tester
Acoustic signal switch on/off
Function buttons
