GMC 2000 Yukon XL Owner'S Manual Download Page 72 | Manualshive

Page: 72 / 413

GMC 2000 Yukon XL Owner'S Manual Download Page 72

1-59

5. Pull the rest of the shoulder belt all the way out of the

retractor to set the lock.

6. To tighten the belt, feed the shoulder belt back into the

retractor while you push down on the child restraint.
You may find it helpful to use your knee to push down
on the child restraint as you tighten the belt.

7. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.

«
...
70
71
72
73
74
...
»

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments