manualshive.com logo in svg

GMC 2000 Yukon XL, Owner'S Manual, Page: 158 / 413

Share
Download
GMC 2000 Yukon XL Owner'S Manual Download Page 158

2-81

CAUTION:

Don’t keep driving if the oil pressure is low. If
you do, your engine can become so hot that it
catches fire. You or others could be burned.
Check your oil as soon as possible and have 
your vehicle serviced.

NOTICE:

Damage to your engine from neglected oil
problems can be costly and is not covered by 
your warranty.

Cruise Light (If Equipped)

United States

Canada

The CRUISE light comes on whenever you set your
cruise control. See “Cruise Control” in the Index.

Tow/Haul Light

This message is displayed
when the tow/haul mode has
been activated.

For more information, see “Tow/Haul Mode” in 
the Index.

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments