manualshive.com logo in svg

GMC 2000 Yukon XL, Owner'S Manual, Page: 369 / 413

Share
Download
GMC 2000 Yukon XL Owner'S Manual Download Page 369

6-66

Crankcase Capacity (Approximate)

After refill, the level must be rechecked. Add enough engine oil so that the fluid is within the proper operating range.
See “Engine Oil” in the Index.

Engine

VIN

Quantity with Filter

[

VORTEC 4800 V8

V

6.0 quarts (5.7 L)

VORTEC 5300 V8

T

6.0 quarts (5.7 L)

VORTEC 6000 V8

U

6.0 quarts (5.7 L)

[Oil filter should be changed at every oil change.

Fuel Tank Capacity (Approximate)

Type

Quantity

4 Door Utility

26.0 U.S. gallons (98.4 L)

Suburban/Yukon XL (1500 Series)

32.5 U.S. gallons (123.0 L)

Suburban/Yukon XL (2500 Series)

38.5 U.S. gallons (147.6 L)

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments