GMC 2000 Yukon XL Owner'S Manual Download Page 336

Page: 336 / 413

6-33

Headlamps

1. Remove the two pins on the top of the headlamp

assembly. To remove the pins, turn the outer pin
outward and pull it straight up. To remove the inner
pin, turn it inward and pull it straight up.

A. Low

Beam Headlamp

B. High

Beam Headlamp

2. Pull the headlamp lens assembly out.

3. Unplug the electrical connector.

4. Turn the bulb counterclockwise and remove it from

the headlamp lens assembly.

5. Put the new bulb into the lens assembly and turn it

clockwise until it is tight. Use care not to touch the
bulb with your fingers or hands.

6. Plug in the electrical connector.

7. Put the headlamp lens assembly back into the

vehicle. Install and tighten the two pins.

Summary of Contents for 2000 Yukon XL





























































































































































































































































































































































































































Search results

Summary of Contents for 2000 Yukon XL

Reviews:

GMC 2000 Yukon XL, Owner'S Manual, Page: 336 / 413

Search results

Summary of Contents for 2000 Yukon XL

Reviews: