manualshive.com logo in svg

GMC 2000 Yukon XL, Owner'S Manual, Page: 15 / 413

Share
Download
GMC 2000 Yukon XL Owner'S Manual Download Page 15

1-2

Seats and Seat Controls

This section tells you about the seats 

--

 how to adjust

them, and fold them up and down. It also tells you about
reclining front seatbacks and head restraints.

Manual Front Seat

CAUTION:

You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle is
moving. The sudden movement could startle and
confuse you, or make you push a pedal when you
don’t want to. Adjust the driver’s seat only when
the vehicle is not moving.

If your vehicle has a manual bucket or split bench seat,
you can adjust it with this lever located at the front of
the seat.

Lift the lever at the front of the seat to unlock it. Using
your body, slide the seat to where you want it. Then,
release the lever and try to move the seat with your body
in order to make sure the seat is locked into place.

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments