manualshive.com logo in svg

GMC 2000 Yukon XL, Owner'S Manual, Page: 265 / 413

Share
Download
GMC 2000 Yukon XL Owner'S Manual Download Page 265

4-62

When You Are Ready to Leave After
Parking on a Hill

1. Apply your regular brakes and hold the pedal down

while you:
D Start your engine;
D Shift into a gear; and
D Release the parking brake.

2. Let up on the brake pedal.

3. Drive slowly until the trailer is clear of the chocks.

4. Stop and have someone pick up and store the chocks.

Maintenance When Trailer Towing

Your vehicle will need service more often when you’re
pulling a trailer. See the Maintenance Schedule for more
on this. Things that are especially important in trailer
operation are automatic transmission fluid (don’t
overfill), engine oil, axle lubricant, belt, cooling system
and brake system. Each of these is covered in this
manual, and the Index will help you find them quickly.
If you’re trailering, it’s a good idea to review these
sections before you start your trip.

Check periodically to see that all hitch nuts and 
bolts are tight.

Trailer Wiring Harness

Your vehicle is equipped with the following wiring
harnesses for towing a trailer.

Basic Trailer Wiring Package

The trailer wiring harness with a seven

-

pin connector

located at the rear of the vehicle and are tied to the
vehicle’s frame. The harness connector can be plugged
into a seven

-

pin universal heavy

-

duty trailer connector

available through your dealer.

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments