manualshive.com logo in svg

GMC 2000 Yukon XL, Owner'S Manual, Page: 121 / 413

Share
Download
GMC 2000 Yukon XL Owner'S Manual Download Page 121

2-44

Your vehicle is equipped with a light sensor located on
the top of the instrument panel in the defroster grille. Be
sure it is not covered, or the system will be on whenever
the ignition is on.

The system may also turn on your headlamps when
driving through a parking garage, heavy overcast
weather or a tunnel. This is normal.

There is a delay in the transition between the daytime
and nighttime operation of the Daytime Running 
Lamps (DRL) and the automatic headlamp systems 
so that driving under bridges or bright overhead street
lights does not affect the system. The DRL and
automatic headlamp system will only be affected when
the light sensor sees a change in lighting lasting longer
than the delay.

To idle your vehicle with the automatic headlamp
system off, set the parking brake while the ignition is
off. Then start your vehicle. The automatic headlamp
system will stay off until you release the parking brake.

As with any vehicle, you should turn on the regular
headlamp system when you need it.

You may be able to turn off your Automatic Headlamp
System. See “Daytime Running Lamps (DRL)” later in
this section for more information.

Lamps On Reminder

A reminder chime will sound when your headlamps or
parking lamps are manually turned on and your ignition
is in OFF, LOCK or ACCESSORY. To disable the
chime, rotate the thumbwheel all the way down. In the
automatic mode, the headlamps turn off once the
ignition key is in OFF.

Daytime Running Lamps

Daytime Running Lamps (DRL) can make it easier for
others to see the front of your vehicle during the day.
DRL can be helpful in many different driving
conditions, but they can be especially helpful in the
short periods after dawn and before sunset.

The DRL system will come on when:
D the ignition is on,
D the headlamp switch is in automatic headlamp mode,
D the automatic transmission is not in PARK (P),
D the light sensor determines it is daytime and
D the parking brake is released.
When the DRL are on, only your DRL lamps will be on.
The taillamps, sidemarker and other lamps won’t be on.
The instrument panel won’t be lit up either.

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments