manualshive.com logo in svg

GMC 2000 Yukon XL, Owner'S Manual, Page: 80 / 413

Share
Download
GMC 2000 Yukon XL Owner'S Manual Download Page 80

2-3

Your vehicle has one
double

-

sided key for the

ignition and all door locks.

Your vehicle may also have
a key that locks and unlocks
the center floor console
only (if equipped).

If you ever lose your keys, your dealer will be able to
assist you with obtaining replacements.

Door Locks

CAUTION:

Unlocked doors can be dangerous.

Passengers 

--

 especially children 

--

 can easily

open the doors and fall out. When a door is
locked, the inside handle won’t open it.

Outsiders can easily enter through an unlocked
door when you slow down or stop your vehicle.

This may not be so obvious: You increase the
chance of being thrown out of the vehicle in a
crash if the doors aren’t locked. Wear safety belts
properly, lock your doors, and you will be far
better off whenever you drive your vehicle.

There are several ways to lock and unlock your vehicle.

Use the keyless entry system (if equipped) or use the
door key.

You can also use your key.

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments