manualshive.com logo in svg

GMC 2000 Yukon XL, Owner'S Manual, Page: 339 / 413

Share
Download
GMC 2000 Yukon XL Owner'S Manual Download Page 339

6-36

Windshield Wiper Blade Replacement

Windshield wiper blades should be inspected at least
twice a year for wear and cracking. See “Wiper Blade
Check” in the Index for more information.

Replacement blades come in different types and are
removed in different ways. For proper type and length,
see “Normal Maintenance Replacement Parts” in the
Index. Here’s how to remove the Shephard’s Hook type.

To replace the windshield wiper blade assembly:

1. Lift the wiper arm and rotate the blade until it is

facing away from the windshield.

2. Push the release lever and slide the wiper assembly

toward the driver’s side of the vehicle.

3. Install a new blade by reversing Steps 1 and 2.

Tires

Your new vehicle comes with high

-

quality tires made by

a leading tire manufacturer. If you ever have questions
about your tire warranty and where to obtain service, 
see your GM Warranty booklet for details.

Summary of Contents for 2000 Yukon XL






























































































































































































































































































































































































































Reviews:

No comments