Glutz SD-L F 9365 Series, Mounting And Operating Instructions

Page: 7 / 112

SD‑L F (9365x)
0548-988-11---20_2022.01.indd
HSK
NSK
GSK
0548-988/12
Page 7 of 87
Mounting and operating instructions
2 SAFETY
2.1 Appropriate use
The swing door drive mechanism with fire protection rating SD-L F (9365x) has been exclusive -
ly designed for operating swing doors with fire protection rating. Any other use beyond these
application limits is deemed inappropriate and inadmissible! In the event of an inappropriate use
of this system, the safety of the user may be jeopar dized and/or the installation be damaged. The
manufacturer declines all responsibility for these injuries/damages!
2.2 Safety notices
The present instructions uses the following symbols and notes in order to point out certain resi -
dual dangers:
Warning:
Involving danger to life and limb.
Attention:
A situation where material could be damaged or the function impaired.
Note:
Hints which facilitate the work.
2.3 Safety regulations
2.3.1 Principles
• According to standard EN 16005/DIN 18650 describing the safety-related requirements for
automatic door systems, a risk evaluation is to be carried out (in consideration of the groups
of door users and the local situation). This is the basis for the choice of the different protecting
measures. The risk evaluation has to be carried out already during the planning stage to guaran -
tee that the automatic door system can be safely installed and operated (see Risk evaluation for
automatic swing door P 01.02.20

DIN 18650).
• When configuring the installation, it is essential to
make sure that the locally applicable regulations
with regard to the closing edges are complied
with, in order to avoid crushing and shearing
points. It is particularly important to make sure
that the door leaves do not have any sharp edges.
The secondary closing edges must be designed by
customers in such a fashion as to eliminate any
dangerous crushing and shearing points.
NSK Secondary closing edge
HSK Main closing edge
GSK Opposing closing edge