Glutz SD-L F 9365 Series, Mounting And Operating Instructions

Page: 18 / 112

SD‑L F (9365x)
0548-988-11---20_2022.01.indd
A

10 Nm
0548-358
0548-360 MOD
0548-988/12
Page 18 of 87
Mounting and operating instructions
Note:
Depending on the assembly situation of the drive mechanism, it may be advisable to
install the program selector on the opposite side (in order to guarantee an optimal
operating facility). Should this be required, the work must be carried out according to
chapter "Electrical connections".
Note:
In cases where it is planned to integrate an open position stop piece into the drive
mechanism (option), this stop piece must be mounted prior to the rod assembly (see
instructions for option 0548-992/02 resp. 0548-992/52).
Note:
In case FLATSCANs are planned, they must be mounted according to chapter 13.8.
Warning:
The drive mechanism must be fastened without torsion and perpendicularly, using all
the six fixing holes! Tighten all the six M6 fixing screws (A) with a torque of 10 Nm !