FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54
OPERATION
JUNO-NET
1.10 DISABLEMENTS - (Authorized User Level Access)
1.10.1 SELECTED DETECTORS
SELECTED DETECTORS
When activated:
The SELECTED DETECTORS
will be illuminated
The STATUS - DISABLED
will be illuminated
The QUEUE REVIEW - DISABLED
will be illuminated
The disabled detectors can be reviewed using the
DISABLED QUEUE REVIEW
The SELECTED DETECTORS button will only operate if
there is at least one detector set to SELECTIVE
DISABLEMENT.
Re-pressing the SELECTED DETECTORS button again
will re-enable the detectors.
LED
LED
LED
button
Using the programming functions (see the ‘Installation & Commissioning Manual’) individual detectors can be set for
SELECTIVE DISABLEMENT. When the SELECTED DETECTORS button is activated those detectors will be disabled. (This may be
required, for example, in a building with smoke detectors inside a room reserved for cigarette smokers. During the day it would
be wise to disable these detectors in order to prevent the obvious false alarms it would otherwise generate.)
12
JUNO-NET EN-54
MAINTENANCE MANUAL
21-08-2005
REVISION 1.0
OPERATION &
ss
ss
FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54