FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54
FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54
To do this press the ALARMS SILENCE /
RESOUND
.
Pressing this button will:
Stop the sounders sounding
Stop sounders queued for delayed
activation
The STATUS - FIRE
will remain lit RED.
Press the INTERNAL BUZZER SILENCE
to
silence the Internal Buzzer. It will also turn off the
INTERNAL BUZZER SILENCE
button
LED
button
LED
At the fire control panel, the STATUS -
FIRE
will illuminate RED.
The fire control panel buzzer will
sound.
The location of the alarm (or alarms)
will be shown on the fire control panel
If more than one alarm has occurred
the QUEUE REVIEW FIRE
will
flash RED indicating that further fire
reports can be displayed on the LCD
display by pressing the QUEUE
REVIEW FIRE
.
If fitted, the external RED Zone LEDs
will be illuminated for the Zones in
FIRE.
LED
LCD display.
LED
button
JUNO-NET
1.2 ALARM - (Authorized User Level Access)
If the fire alarm control panel signals an ALARM the following events will take place:
The sounders, I/O modules and other outputs will operate in accordance with their programming.
EVACUATE IN ACCORDANCE WITH THE SITE PROCEDURE
ONLY WHEN AUTHORISED
should you silence the alarms.
DO NOT PRESS
UNTIL THE ALARM CONDITION HAS BEEN DEALT WITH.
SYSTEM RESET
OPERATION
4
JUNO-NET EN-54
MAINTENANCE MANUAL
21-08-2005
REVISION 1.0
OPERATION &
ss
ss
LED will be lit at each new Alarm event
