FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54
FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54
FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54
OPERATION
JUNO-NET
1.5 READ THE FIRE, FAULT, TEST AND DISABLED QUEUES
Fire, fault, test, and disabled messages are shown on the LCD display.
The LCD has a limited display area. If more messages exist than can be shown on the LCD display the
FIRE, FAULT, TEST or DISABLED LEDs illuminate on the QUEUE REVIEW area of the fascia. The following
procedure describes how to display the additional messages.
If the QUEUE REVIEW - FIRE
is flashing RED....
Press the QUEUE REVIEW - FIRE
to display the first queued message.
Press the button again to review the next queued message. Do this until all
messages have been reviewed. The LED stops flashing RED, but remains lit,
once all messages have been displayed.
After 20 seconds the first fire event will be re-displayed.
LED
button
If the QUEUE REVIEW - FAULT
is flashing AMBER....
Press the QUEUE REVIEW - FAULT
The LED illuminates steady AMBER when all
messages have been displayed.
After 20 seconds the first fault will be re-displayed unless a fire has occurred in
which case the first fire will be re-displayed instead.
LED
button to display the first queued message.
Press the button again to review the next queued message. Do this until all
messages have been reviewed.
If the QUEUE REVIEW - TEST
is illuminated AMBER....
Press the QUEUE REVIEW - TEST
to display the Zones in test mode.
Sometimes not all the Zones in test mode can be displayed at once, in this case
press the button again to see the next set of Zones in test mode.
After 15 seconds the display will return to it’s quiescent state (usually the
company name and current time).
LED
button
If the QUEUE REVIEW -DISABLED
is illuminated AMBER....
Press the QUEUE REVIEW -DISABLED
to display the disablements on
the LCD.
LED
button
Sometimes not all the disablements can be displayed at once, in this
case press the button again to see the next set of disablements.
After 15 seconds the display will return to it’s quiescent state (usually the
company name and current time).
FIRE
FAULT
TEST
DISABLED
6
JUNO-NET EN-54
MAINTENANCE MANUAL
21-08-2005
REVISION 1.0
OPERATION &
ss
ss
FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
TRANS. FAULT
PAPER FEED
LAMP TEST
SYSTEM RESET
INTERNAL BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
AUXILIARY
RELAYS
SOUNDERS
ENABLE/DISABLE
SELECTED
DETECTORS
DELAYS
ACTIVE
STATUS
FAULTS
CONTROLS
DISABLEMENTS
QUEUE REVIEW
SILENCE/RESOUND
ALARMS
ESC
OK
FIRE ALARM SYSTEM
COMPLIES WITH
-2: 1997 / AC: 1999
EN54-4: 1997 / AC: 1999
EN54
General User Level
Access Code entry not required
