![background image](http://html1.mh-extra.com/html/global/juno-net-en-54/juno-net-en-54_operation-and-maintenance-manual_2231987020.webp)
MAINTENANCE
JUNO-NET
2.8 USE OF PROGRAMMING FUNCTIONS FOR MAINTENANCE
The following programming functions can be used to check that the panel is operating correctly.
Note that to use these functions the installer needs to have granted ‘User Access’ to the following
functions. By default, access is denied.
Entry to Programming Mode is covered in the section 2.8.
1-1 Display Historic Log
1-2 Print Historic Log Entries
1-3 Clear Historic Log
1-4 Print Loop/Device Set-up
The panel logs all events in an internal event log. It can store a rolling 2000 entries. When it is full the latest
entry is added and the oldest entry discarded.
Help is automatically displayed on entry to the function because it is not possible to display a log entry and
help at the same time.
To select a specific entry, input the number and then press ENTER.
Select which entries you wish to print and press ENTER.
If the printer is already in use it is necessary to wait until the printer is free before starting a new print job.
If you wish to stop a printout enter the function again and you will be given the option of canceling the
printout.
This function cannot be accessed remotely (from a Repeater or the PC Graphics Interface).
Nothing will be printed if the printer is disabled by (function 8-4-3).
Note that once the log is full the log entry number (0001 - 2000) will change for each logged event but log
entry 0001 will be the oldest entry and 2000 will be the most recent.
Clears the Historic Log.
Prints all the device information for the specified Analogue Loop. The information printed includes the
device address, type, zone, text label and whether it is currently disabled.
If the printer is already in use it is necessary to wait until the printer is free before starting a new print job.
If you wish to stop a printout enter the function again and you will be given the option of canceling the
printout.
This function cannot be accessed remotely (from the PC Graphics software or a Repeater).
Nothing will be printed if the printer is disabled by (function 8-4-3).
19
JUNO-NET EN-54
MAINTENANCE MANUAL
21-08-2005
REVISION 1.0
OPERATION &
ss
ss