28
Assigning several home stations to a call button
If several home stations are to be called simultaneously when
a door station call button is pressed, a call button can be
assigned to several home stations as follows:
1. Press the "Systemprog." button on the
control device
for
3 seconds to start programming mode (see Page 19).
2. Press the call button to which the home stations are to be
assigned at the
door station
for 3 seconds until you hear a
short acknowledgement tone.
✓
You will hear a long acknowledgement tone.
3. Go to the
first home station
.
Press the
button for 3 seconds until you hear a short
acknowledgement tone.
✓
A long acknowledgement tone indicates successful
assignment.
4. Go to the
door station
and press the call button again for
3 seconds.
5. Go to the
second (parallel) home station
.
Press the
button for 3 seconds until you hear a short
acknowledgement tone.
✓
A long acknowledgement tone indicates successful
assignment.
6. Repeat Steps 4 and 5 to assign an additional parallel home
station to the call button.
7. Press the "Systemprog." button on the
control device
to
exit the programming mode.
8. Carry out a function test.
