20
One-family house: Assigning door station call button to home station
To assign a door station call button to a home station, proceed
as follows:
1. Press the "Systemprog." button on the
control device
for
3 seconds to start programming mode (see Page 19).
2. Press the call button on the
door station
for 3 seconds
until you hear a short acknowledgement tone.
✓
You will hear a long acknowledgement tone.
3. Press the
button on the
home station
for 3 seconds
until you hear a short acknowledgement tone.
✓
A long acknowledgement tone indicates successful
assignment.
Three short acknowledgement tones indicate faulty
assignment. The memory of the home station may already
be occupied. A maximum of 10 call buttons can be
assigned to a home station (a maximum of 15 call buttons
to a surface-mounted hand-free feature home station).
4. Press the "Systemprog." button on the
control device
to
exit the programming mode.
5. Carry out a function test.
i
Releasing the button after 3 seconds
If the button press is not ended after the first acknowledge-
ment tone, all assignments of the respective door/home
station will be deleted after an additional 3 seconds.