27
Assigning home station via floor-call button
If you cannot access the home during start-up, you can also
assign the home station via a connected floor-call button:
1. Press the "Systemprog." button on the
control device
for
3 seconds to start programming mode (see Page 19).
2. Press the call button to be assigned to the home station
on the
door station
for 3 seconds until you hear a short
acknowledgement tone.
✓
You will hear a long acknowledgement tone.
3. Go to the
floor-call button of the home station
to be
assigned.
Press the floor-call button for 3 seconds until you hear a
short acknowledgement tone.
✓
A long acknowledgement tone indicates successful
assignment.
4. Press the "Systemprog." button on the
control device
to
exit the programming mode.
i
Only possible
with directly connected home station
With several parallel home stations, only the home station
connected directly to the floor-call button can be taught in via
the floor call button.
