TROUBLESHOOTING
18
Ginnys.com 800-544-1590
PROBLEM
CAUSE
SOLUTION
Paddle cannot be
removed from pan
Bread difficult to shake
out of pan
Bread machine not
operating/kneading;
paddle not moving
Ingredients not mixed
Burning odor noted on
operation
Display screen shows
“HHH” and machine
beeps continuously
Display screen shows
“E EO”
•Dough is baked on
•Bread sticking
•Menu choice preheats
first
•Wrong menu setting
chosen
•Bread machine not
switched on/plugged in
•Bread pan not
correctly positioned
•Time delay selected
•Wrong menu setting
chosen
•Did not start bread
machine
•Forgot to put kneading
paddle in bread pan
•Ingredients spilled
inside baking chamber
•Temperature inside
bread machine is too
high— machine still
hot after the previous
baking procedure
•Temperature sensor is
faulty
•Soak with warm water for 10
minutes and twist paddle to loosen
•Lightly wipe the inside of the bread
pan with vegetable oil before adding
ingredients
•See display symbol for current step
of cooking cycle
•See pages 8–9 to choose correctly
•
Plug in and after selecting from
menu, press START/PAUSE/STOP to
start machine
•Check pan position
•Bread machine will not start until
start time is reached
•See pages 8–9 to choose correctly
•After selecting from menu, press
START/PAUSE/STOP to start machine
•Always make sure paddle is in
position on drive shaft before adding
ingredients
•Take care when adding ingredients
to bread pan— if ingredients spill
into chamber burning can occur
•Press START/PAUSE/STOP, open lid
and allow machine to cool down for
10–20 minutes
•Contact Customer Service