GINA 6000N-5, 6000NV-5, 8000N-5, & 8000NV-5
GINA User’s Manual
3-3
© 2001 GRE America, Inc. All rights reserved. This material is the property of GRE America, Inc. Copying or reproducing this material
is strictly prohibited. All violators shall be prosecuted to the fullest extent of the law.
3/01 (rev. 3)
Description:
DISPLAY lists the current parameter settings.
(A)sync
COMBAUD, ECHO and HARDFLOW
(D)ate
SETTD
(I)d
RID, TXP and ENR
(L)ink
PACSIZE and RFBAUD
(M)isc
CHSEL
(T)iming
DEFWAIT, PACWAIT and TXDELAY
(Z)
List Control Command Set (CCS)
(6)
ECHO
Mnemonic:
ECHO = N
Parameter:
N = 0 (OFF) or 1 (ON)
Command abbreviation:
E
Default:
1 (ON)
Example:
ECHO=1 <Enter> or E=1 <Enter>
Description:
When ECHO is ON, characters received from the
sending unit are echoed on the computer display. When ECHO is
OFF, characters are not displayed. Echoing is disabled when in the
transparent mode.
(7)
ENABLE REPEATER
Mnemonic:
ENR=N
Parameter:
N = 0...2
0 = Disable Repeater
2 = Temporary Enable Repeater
1 = Permanently enable Repeater
Default:
0 (OFF)
Example:
ENR=0 <Enter>
Description:
Makes GINA a dedicated repeater. If ENR=2, the re-
peater function is temporarily enabled. When the power is shut off,
GINA disables the repeater. If ENR=1, the repeater function is per-
manently enabled. When the GINA is shut off, the repeater remains
enabled.
(8)
HARDWARE FLOW
Mnemonic:
HARDWARE FLOW = N
Parameter:
N= 0 (OFF) or 1 (ON)
Command abbreviation:
HF
Default:
0 (OFF)
Example:
HARDWARE FLOW =1 <Enter> or
HF=1 <Enter>
Description:
When HARDWARE FLOW is ON, CTS and RTS are
enabled. When HARDWARE FLOW is OFF, CTS and RTS are
disabled. The HARDWARE FLOW must be disabled if your
peripheral does not have any RTS and CTS flow control or if it is a
three wire configuration (RXD, TXD, and GND).