Gima SATURNO WALL, Operative Manual, Page: 16 / 34

MO003-GB 18/05/06
Operative Manual
Rev.0 Page 16 of 34
Before installing the scialytic lamp make sure of the following conditions:
•
The electrical plant of the environment (premises) in which the installation will be carried out
must conform to the CEI 64-8 regulations (regulations for electrical plant for premises designated
for medical use) and the national laws and/or regulations in force.
•
An electrician qualified to issue the certificate of conformation must certify the electrical plant.
•
Checking the grounding must be certified, as foreseen in the regulation in force.
After having made sure of the correspondence with the above-listed requisites, identify which of the
following types of electrical plant you are facing.
Chapter 3 –
Installing the product
3.1 Installing wall plate
The first operation to execute consists in using the sheet in order to
make the holes to the wall in the way described from same contained
instruction.
,
Whenever the plate is not exactly horizontal, undesirable spontaneous movement of the
horizontal arm of the lamp might occur, moving from the non-equilibrium position to the
equilibrium position.
After have carried out the holes, fix the slab to the wall with the
modality described to paragraph 2.1
Verify that the taken one of the cable of feeding of the lamp (1) can
catch up a point of feeding of the room without to interfere with the
movements of the lamp and without being of obstacle to the operating
ones and to the equipments.
1