![background image](http://html.mh-extra.com/html/gima/pc-900b/pc-900b_user-manual_2227828018.webp)
18
This menu includes the following setups:
1. The high alarm limits of SpO
2
:
SpO2 ALARM_H
: 50%-100%, off
2. The low alarm limits of SpO
2
:
SpO2 ALARM_L
: off, 50%-99%
3. The high alarm limits of pulse rate:
P_RATE ALARM_H
:
70-250 beats/m, OFF
4. The low alarm limits of pulse rate:
P_RATE ALARM_L
: OFF,
40-100 beats/m
5. Wave curve selection:
CURVE WAVE
: FILL or LINE
6. Renewing of defaults.
LOAD DEFAULTS
The wave curve selection means that: FILL indicates the beneath part
of photoplethsmogram is filled. LINE indicates the photoplethysmogram is
drawn in curve line.
Default values as follow:
SpO
2
alarm high limit: 100%
SpO
2
alarm low limit: 92%
Pulse Rate alarm high limit: 130 beats/min.
Pulse Rate alarm low limit: 50 beats/min.
Curve: Line
V. TIME SET Menu
Figure 9
In this menu, press
or
button to move the cursor up or down, press
+
button or
-
button to change the data highlighted by the cursor.
Attention
: Any time adjustment will delete any stored trend data, so please
take care before making this adjustment.
The procedure is as follows:
1. Change time.
2. Move the cursor to SAVE then press the ENTER button to enter the