13
6
Only use Creative SpO
2
probes approved for use with this Monitor.
Always make sure that the sensor is not contaminated or broken before use.
Always take care to check that the sensor is applied correctly.
Warning:
Do not use the SpO
2
sensor if it is damaged or dirty.
If shock, low blood pressure, serious blood vessel constriction, serious
anemia, very body low temperature, artery block near sensor or incomplete
heart asystole occur the pulse signal may disappear.
Chapter V
Screen display and Operation
I. Screen main display menu
Figure 5
The first line of data shows time (hour, minute)/patient ID, patient type:
Adult (ADU) or Neonate (NEO), the memory area full indicator (
) alarm
sound closing (!), silence (
) or non silence (
), bluetooth symbol (
)
and battery indicator .
Attention:
a) When the memory full indicator is displayed, further patient data cannot
be stored. If you want to save the new data effectively, you need to enter
the NEW PATIENT menu toe delete the data in the storage area, or to
change patient ID., beside you can set up trend RENEW into AOTO mode,