16
ENGLISH
Instructions for Safe Operations
•
Check the device to make sure that there is no visible damage that may affect user’s safety and
measurement performance. When there is obvious damage, stop using the device.
•
Necessary service must be performed only by qualified technicians. Users are not permitted to
repair it by themselves.
•
The oximeter cannot be used together with the devices not specified in User Manual.
Cautions
•
Explosive hazard-DO NOT use the oximeter in environment with inflammable gas such as some
ignitable anesthetic agents.
•
DO NOT use the oximeter while the testee is under MRI or CT scanning.
Warnings
•
An uncomfortable or painful feeling may appear if using the sensor of this device continuously on the
same place for a long time, especially for the testee with poor microcirculation. It is recommended
that the sensor should not be applied to the same location for longer than 2 hours. If any abnormal
condition is found, please change the position of sensor.
•
For the individual testee, there should be a more prudent inspecting in the placing process. The
sensor can not be clipped on the edema and tender tissue.
•
The local law should be followed when disposing of the expired device or its accessories.
Attentions
•
Keep the oximeter away from dust, vibration, corrosive substances, explosive materials, high
temperature and moisture.
•
If the oximeter gets wet, please stop operating it. When it is carried from a cold environment to a
warm and humid environment, please do not use it immediately.
•
DO NOT operate the button on the front panel with sharp materials.
•
High temperature or high pressure steam disinfection to the oximeter or sensors is not permitted.
Refer to related chapter for instructions of cleaning and disinfection.
•
The intended use of this device is not for therapy purpose.
•
Caution: U.S. federal law restricts this device to sale or use by or on the order of a physician.
1 Overview
1.1 Appearance
Figure 1
Display screen
Power/Back
Navigation keys
Recall/Mute
Mode/OK
SpO2 probe connector
Reserved port
Data interface
