19
ENGLISH
3 SpO2 Sensor Connection
3.1 Choose SpO2 Sensor Adapter
The device is equipped with universal Y-type sensors including different adapters for various measuring sites.
Three types of sensor adapters (big clip, small clip and rubber wrapper) are provided for the Y-type SpO2
sensor. They can be used to place on different measuring sites, such as ear, tongue, leg or tail. Please
select the appropriate sensor and adapter according to its shape size and the measuring site.
3.2 Install Sensor Adapter onto SpO2 Sensor
Follow the installing methods below to install the sensor adapter onto the sensor, and then connect the
SpO2 sensor cable to the connector labeled "SpO2" at the right side of the device.
After starting the oximeter, clip or wrap the sensor on to the measuring site.
Figure 5 Clip type sensor adapter
Installation of Big Clip
1. Slip off the two rubber jackets from the clip;
2. Fix the sensor cable to the clip (Figure 6A);
3. Slide one branch of Y-type sensor (the side with coating inward) into the fixing slot from the clip opening
to the stop at the end of the slot (Figure 6B), and then fix the other branch;
4. Install the two rubber jackets onto the clip (Figure 6C).
Figure 6A Figure 6B Figure 6C
Big Clip installation