GILES FSH-2 Operation & Service Manual Download Page 53 | Manualshive

Page: 53 / 66

GILES FSH-2 Operation & Service Manual Download Page 53

43

Cleaning & Maintenance

Model: FSH-2, FSH-2A-99

5.04.1

Semi-Annual (6-Mo) Fire Suppression System Inspection & Maintenance

• Confirm that the fire hazard potential has not changed.
• Inspect suppressant storage tank for chemical level and charge pressure.
• Inspect and test the Automan release mechanism.
• Check all nozzles to ensure they are free of grease build-up. Confirm that all nozzle blow-off caps are in place and in

good condition; replace as needed. See

Section 2.05.2, Fire Extinguisher Nozzle Locations

.

• Inspect and test the remote manual activation station for function and wear.
• Install test detector link; cut to test automatic actuation.
• Inspect and clean detector links. Confirm that detector links are of the correct temperature rating. See

Section

2.05.1, Fire Suppression Detector Links & Location

.

• Inspect link conduit and wire cable for wear at pulleys and detectors; replace if necessary.
• Record maintenance date and service performed in a permanent file, and sign-off on tag attached to system in a

conspicuous location.

Service and inspection of the fire suppression system must be performed by a qualified

Ansul® Distributor/Dealer

. As a

minimum, field inspection of the system must be conducted semi-annually (every 6 months) and shall consist of the following:

Same as

Semi-Annual Inspection & Maintenance

except:

• All detector links must be replaced with new. See

S

ection 2.05.1, Fire Suppression Detector Link Specification &

Location.

5.04.2

Annual (12-Mo) Fire Suppression System Inspection & Maintenance

Same as

Annual Inspection & Maintenance

except:

• Replace wet-chemical fire suppressant.
• Hydrostatic test and certify suppressant tank and compressed gas charging cartridge. As alternative components

can be replaced with new.

• Flow test the regulator.

5.04.3

12-Year Fire Suppression System Inspection & Maintenance

«
...
51
52
53
54
55
...
»

Summary of Contents for FSH-2



































































Reviews:

No comments