GILES FSH-2, Operation & Service Manual, Page: 44 / 66

34
Operation
Model: FSH-2, FSH-2A-99
4.04 E.A.C. Filter Cell Cleaning Timer [FSH-2A-99; E.A.C. MODEL ONLY]
The Model FSH-2A-99 Hood is equipped with an E.A.C. Filter Cell Cleaning Timer . The feature is intended to help
user maintain a proper cleaning routine for the sustainable E.A.C. Collector Cell . Timely cleaning is essential for
ensuring that the hood continues to effectively remove grease-laden cooking vapors from the recirculated air.
After a preset period, the timer signals that the collector cell should to be cleaned
(or if available, exchanged with a
clean standby cell) . If cleaning (exchange) is not completed within the alloted timeframe, timeout occurs and power
to the fryer is shutdown and remains locked-out until cleaning is performed. After necessary filter maintenance is
performed, timer automatically resets and normal operation is restored ... a fresh countdown begins.
Should a shutdown occur during a peak demand period or while cooking is in progress, a
SNOOZE feature is
provided to temporarily postpone shutdown and continue operation for a short period.
Timer indicators and
[SNOOZE] control button are located on the hood control box panel. Not included on FSH-2
model hood .
① CHANGE SOON
The amber indicator turns ON when timer enters [WARNING] mode. If the
collector cell is cleaned (exchanged) within the next 24 hours , timer
automatically resets and begins a new countdown. Normal operation continues
without interruption.
② CHANGE NOW
The red indicator turns ON when timer enters [TIMEOUT] mode, signaling that
alloted time between cleanings has expired. An audible alarm sounds, and
fryer power is shutdown . Power is locked out until cell cleaning (exchange) is
completed. The Hood [POWER] and [FRYER POWER] lights will turn OFF .
Placing Power Switch in the [OFF] position silences the alarm. Returning switch
to [ON] does not restart the hood unless timer is reset by cleaning the cell.
Timer Operation:
1
2
NOTE: Does not apply to unit with HEPA Filter.
③ SNOOZE Button
In the event that [TIMEOUT] occurs during a period of high customer demand
or while a cooking cycle is in progress, the SNOOZE feature may be used to
back out of [TIMEOUT] mode. Pressing the [SNOOZE] button temporarily
places timer back into [WARNING] mode for two (2) hours, allowing
continued operation.
Two (2) snooze periods can be used. During the second snooze period, the
[CHANGE SOON] light flashes, indicating final snooze period. After a second
period expires, fryer is once again locked-out until the E.A.C. cell is cleaned
(exchanged) .
NOTE: [SNOOZE] Button is only effective if the timer is in [TIMEOUT] mode
and the red [CHANGE NOW] light is ON.
3