GILES FSH-2, Operation & Service Manual, Page: 42 / 66

32
Operation
Model: FSH-2, FSH-2A-99
If either, or all, of the baffle, charcoal, HEPA filters is not in place, or not positioned correctly, the red
[FILTER MISSING] light will turn ON. Power to the fryer under the hood is shutdown until the
condition is corrected; the amber [FRYER POWER] light turns OFF . No audible alarm will sound.
• Hood fan continues running.
• Check to confirm that all filters are in place. See Sections 4.02.3 - 4.02.5 - 4.02.6, Filter
Installations.
• Remove and reinstall filters to ensure that they are seated properly in the guides and are pushed
fully into the filter compartment so that the cover fits properly. Each filter must also actuate a
proofing switch. Charcoal and HEPA filter switches are in the rear wall. Baffle filter switch is a
lever switch on the right side under the hood.
4.03 Hood Filter Alarms
4.03.1 Baffle or Charcoal [or HEPA] Filter Missing
If any filter becomes clogged, or there are other conditions that obstruct airflow, causing it to fall
below the minimum required to provide effective capture of cooking vapors , power to the fryer under
hood is shutdown, the amber [FRYER POWER] light turns OFF and a constant (steady) tone audible
alarm sounds until corrective action is taken.
• Hood fan continues running.
• Clean the baffle filter, see Section 4.04.1, Baffle Filter Cleaning .
• Replace charcoal or HEPA filter with fresh new, see Section 4.03.5, Charcoal Filter Maintenance .
• Inspect Hood plenum to ensure that no other obstructions exist.
• Check the hood exhaust outlet and be sure that nothing is obstructing it or the surrounding area.
4.03.2 Baffle or Charcoal [or HEPA] Filter Clogged
NOTE: There is no indicator light for clogged filter, only an audible alarm tone.