Giles & Posner GBF-35 Banked, Operation & Service Manual

Page: 19 / 110

GBF-Series Fryers
Installation
7
2.03 Electrical Requirements
GBF Series Fryers are available from the factory to operate with the voltages and phases listed below.
Check the rating label/plate on the rear panel to determine the correct supply power requirement.
Each fryer unit of a banked battery, requires separate power service.
2.04 Electrical Specifications (per Fryer Unit)
• Fryers must be adequately and properly grounded. Improper grounding may result in electrical
shock. Always refer to local electrical codes for proper grounding procedures on this or any other
electrical equipment. Always consult with an electrician or other qualified service person to ensure
circuit breakers and wiring are of sufficient rating and gauge for the equipment being installed.
CAUTION
Voltage Phase Hz
Watts
Amps
Circuit Breaker
Required
L1 L2 L3
208+
3 60 18,250 53 53 50 65
208 3 60 18,000 50 50 50 60
240+
3 60 18,250 46 46 43 55
240 3 60 18,000 43 43 43 50
380+ 3 50 16,720 43 43 40 50
380 3 50 16,485 41 41 41 45
415+ 3 50 18,250 46 46 43 55
415 3 50 18,000 43 43 43 50
+
Denotes fryer unit which powers the filtration pump.