Giles & Posner GBF-35 Banked, Operation & Service Manual, Page: 63 / 110

51
GBF-Series Fryers
Fryer Operation
6. Set the Power Switch to the ON position.
The Power Light will turn on. If the unit is
equipped with Basket Lifts and you wish to
enable them, place the Basket Lift Switch
in the LIFT position. If Lifts are not installed,
this switch position will be plugged .
7
6
5
7. Set Heat Switch to the HEAT position. The
Heat Light will illuminate.
Computer: Main Display will read “ HOLD”
& the Scrolling Display will read “ Oil
Heating ”.
Mechanical: The Load light on the
thermostat will turn on.
Oil will begin heating to set-point temperature.
10
11
9
8
9
7
NOTE:
•
Computer Control: If an alarm sounds when
Power Switch is placed in the
ON position
and the Scrolling Display reads “ Drain
Open - Close & Push Reset ”, follow Step-4
above and then press the Alarm Reset key
on the Controller.
•
Mechanical Control: If an alarm sounds
when Power Switch is placed in the
ON
position and the “Drain Open” indicator
light
is lit, follow Step-4 above and
then press the ALARM RESET button on the
Control Panel.
5.02 Cooking Procedure (continued)
Continued next page
NOTE:
•
During the initial heat-up of the day, particularly if cool shortening is in
a thickened state, it is recommended that the vat be stirred
occasionally while heating to prevent false “Hi-Limit” or “Low Oil
Level” alarms.
5
6
8
10
11
9
7
5
6
8
11A
11
11A
Mechanical
Computer
9A
9A