Giles & Posner GBF-35 Banked Operation & Service Manual Download Page 25

Page: 25 / 110

Overview

GBF-Series Fryers

•

Always use Thermal Oven Mitts when handling any of these parts during normal operations;
they can become very hot!

3.01 Auto-Basket Lifts (Optional) & Baskets

Item

Description

Function

Basket Carrier (2)

Holds basket in a proper position while it is being lifted from
or lowered into the cook vat by the Basket Lift.

Auto-Basket Lift (2)

Lowers or lifts basket at beginning and end of cook cycle.

Basket Support/

Fry Screen

Provides support surface for Baskets when Auto-Lifts are not
installed or used. Serves as a Fry Screen to prevent
excessive crumbs and cooking residue from accumulating
around the heating elements.

Basket (2)

Contains product during cooking.

CAUTION

Not fully seen

Summary of Contents for GBF-35 Banked















































































































Search results

Summary of Contents for GBF-35 Banked

Reviews:

Related manuals for GBF-35 Banked

Brands by name

Popular brands

Giles & Posner GBF-35 Banked, Operation & Service Manual

Search results

Summary of Contents for GBF-35 Banked

Reviews:

Related manuals for GBF-35 Banked

Brands by name

Popular brands