- Pads must be replaced if the friction material
thickness is less than 1.5 mm.
- Upon refitting, operate in reverse order bearing
in mind that the arrow on the plate indicates the
disc sense of rotation.
Fill
Rear - combined
Oil refill and purging
- Once the bleed valve is closed, fill the system
with TUTELA TOP 4 brake fluid to the maximum
level.
- Undo the bleed screw.
- Apply the tube of the special tool to the bleed
screws. When purging, it is necessary to refill the
oil reservoir permanently while working with a Mi-
tyvac pump on the bleed screw until no more air
comes out of the system. The operation is finished
when just oil comes out of the bleed screws.
- Do up the bleed screw.
N.B.
IF AIR CONTINUES TO COME OUT DURING PURGING, EXAMINE ALL THE FITTINGS:
IF SAID FITTINGS DO NOT SHOW SIGNS OF BEING FAULTY, LOOK FOR THE AIR INPUT AMONG
THE VARIOUS SEALS ON THE PUMP AND CALLIPER PISTONS.
N.B.
DURING PURGING FREQUENTLY CHECK THE LEVEL TO PREVENT AIR GETTING INTO THE
SYSTEM THROUGH THE PUMP.
SMT RCR
Braking system
BRAK SYS - 97
Summary of Contents for SMT RCR 633793
